GL104E 10.4" HMI Panel — Representative panel image; confirm the code and the cut-out with CINKR.
Basic SERIES · GL104E
The GL104E is a 10.4-inch 800 × 600 resistive HMI panel from the Green Series - Economical (GL) range, with an ARM RISC 32-bit 800 MHz processor, 128 MB RAM and 256 MB flash storage; 1 Ethernet port, 2 serial ports and 1 USB host port.
Generation: Green Series - Economical (GL) in the Basic series
Confirm that the GL104E model code on the cabinet label matches this page.
Supplied by CINKR. Confirm the panel cut-out, the interfaces and the protocol before ordering.
PRODUCT GUIDE
The GL104E is a 10.4-inch 800 × 600 resistive HMI panel from the Green Series - Economical (GL) range, with an ARM RISC 32-bit 800 MHz processor, 128 MB RAM and 256 MB flash storage; 1 Ethernet port, 2 serial ports and 1 USB host port.
QUICK DECISION
BEST FIT
CHECK BEFORE ORDERING
CONSIDER ANOTHER CODE IF
The GL104E is a 10.4-inch 800 × 600 resistive HMI panel in the Green Series - Economical (GL) generation of the Basic series. Only one code is published at this display size in the Green Series - Economical (GL) generation.
Published data: 10.4-inch display · 800 × 600 · resistive touch · ARM RISC 32-bit 800 MHz · 128 MB RAM · 256 MB flash.
The interface set is 1 Ethernet port, 2 serial ports and 1 USB host port.
Panels in this size class are used on machine tools, packaging and filling lines, textile and printing machinery, battery and solar production equipment, rubber and plastics machines, and lifting equipment. The deciding factors are the panel opening, the protocol the machine program expects and the port set the cabinet already uses.
A 10.4-inch panel suits operators who work close to the machine. Where the panel is read from a distance or shows dense process graphics, compare the larger sizes in the same generation before ordering.
When a panel is replaced, the model code alone is not enough. Panels that share a display size and resolution still differ in interface options, memory, panel depth and certification, so the variant code has to match the cabinet.
Send the existing panel label, the panel opening measurements and photos of the cabinet wiring with the request. Every value published on this page comes from the reference specification table for the code.
Choose the GL104E when the machine needs a 10.4-inch display at 800 × 600 and the cabinet already uses 1 Ethernet port, 2 serial ports and 1 USB host port.
Compare another model when the panel has to be larger, brighter, capacitive, or when the machine program expects an interface this group does not list. This group does not list Wi-Fi, 4G and CANopen.
SELECTION CHECKLIST
SPECIFICATIONS
Values come from the reference specification table for this page. A value the table does not publish is marked as confirm-before-ordering rather than estimated.
| Model code | GL104E |
|---|---|
| Series | Basic series · Green Series - Economical (GL) |
| Interface summary | 1 port · 2 serial ports |
| Display | |
| Display size | 10.4" |
| Resolution | 800 × 600 |
| Display area | 211.2 × 158.4 mm (H × V) |
| Colours | 16.7 million colours |
| Viewing angle | 70/70/60/70 (L/R/U/D) |
| Contrast ratio | 500:1 |
| Backlight | LED |
| Brightness | 350 cd/m² |
| Backlight life | > 30,000 hours |
| Touch panel | 4-wire resistive |
| Hardware | |
| Processor | ARM RISC 32-bit 800 MHz |
| RAM | 128 MB |
| Flash storage | 256 MB |
| USB host | 1 port |
| USB device | 1 port |
| SD card | Not offered on this model |
| Interfaces | |
| Ethernet | 1 port |
| Serial ports | COM0: RS232/RS485/RS422 · COM2: RS232 |
| CANopen | Not offered on this model |
| Wi-Fi | Not offered on this model |
| 4G | Not offered on this model |
| HDMI | Not offered on this model |
| RFID | Not offered on this model |
| Power | |
| Input power | DC 10.8 to 28 V |
| Power consumption | 8W at 24 V DC |
| Allowable power loss | < 3ms |
| Insulation resistance | > 50 MΩ at 500 V DC |
| Dielectric strength | 500 V AC for 1 minute |
| Power isolation | Isolated |
| Serial port isolation | Not offered on this model |
| Mechanical | |
| Enclosure | Engineering plastic |
| Panel dimensions | 310 × 230 × 56 mm |
| Panel cut-out | 299 × 219 mm |
| Mounting | Panel mounting |
| Front protection | IP65 (front panel) |
| PCB coating | Not offered on this model |
| Environment | |
| Operating temperature | 0 to 50 °C |
| Operating humidity | 10 to 90 % RH (non-condensing) |
| Storage temperature | -20 to 60 °C |
| Storage humidity | 10 to 90 % RH (non-condensing) |
| Vibration resistance | 10 to 500 Hz, 30 m/s², X, Y, Z direction/hour |
| Cooling | Natural air cooling |
| Certification and software | |
| CE certificate | EN 61000-6-4:2007+A1:2011, EN 61000-6-2:2005 |
| Configuration software | Kinco DTools |
| Remote maintenance | EdgeAccess 1.0 |
COMPARE RELATED PANELS
Related model codes help you avoid choosing a neighbouring size by accident. A different series or generation is not a substitute without a cut-out and port check.
| Model | Main use | Display | Resolution | Ports | Relationship |
|---|---|---|---|---|---|
| GL104E | Cost-sensitive machine panels with a fixed, smaller port set | 10.4" | 800 × 600 | 1 port · 2 serial ports | Selected code |
| GL100 | GL100E | Cost-sensitive machine panels with a fixed, smaller port set | 10.1" | 1024 × 600 | 2 serial ports · Ethernet on GL100E | Same generation — compare the port set, memory and panel depth. |
| GL043 | GL043E | Cost-sensitive machine panels with a fixed, smaller port set | 4.3" | 480 × 272 | 2 serial ports · Ethernet on GL043E | Same generation — compare the port set, memory and panel depth. |
| GL070 | GL070E | Cost-sensitive machine panels with a fixed, smaller port set | 7" | 800 × 480 | 2 serial ports · Ethernet on GL070E | Same generation — compare the port set, memory and panel depth. |
Related model codes show a size and interface comparison, not interchangeability. Confirm the cut-out, the port arrangement and the protocol before treating a neighbouring code as a replacement.
DOWNLOADS
Documentation is released for the exact model code, because the drawing, the port layout and the certificate follow the variant. Every item below is confirmed with the quotation.
Operating instructions, parameter references and panel setup information.
Released after the model code and the hardware details are confirmed.Panel outline, panel cut-out and depth drawing for the machine door.
Released after the model code and the hardware details are confirmed.Kinco DTools or Kinco DTools Pro project software for this generation.
Released after the model code and the hardware details are confirmed.CE testing details and UL records for the model codes that carry them.
Released after the model code and the hardware details are confirmed.FAQ
The reference table lists a 10.4-inch display at 800 × 600 with 16.7 million colours and a resistive touch panel. Confirm the variant code if the machine already has a panel cut-out.
The published interface set is 1 Ethernet port, 2 serial ports and 1 USB host port. Compare the cabinet wiring and the protocol the machine program expects before treating the panel as a replacement.
The panel is powered from DC 10.8 to 28 V. It fits a 299 × 219 mm panel opening. The panel body measures 310 × 230 × 56 mm. Confirm both against the machine before ordering.
Panel replacement is a compatibility question rather than a model question. Confirm the cut-out, the mounting depth, the port set and the protocol the machine program expects before ordering. CINKR checks these details against the model and photos you send.
REQUEST A QUOTE
Tell us whether the GL104E is for a new machine, an upgrade or a replacement, and include the panel opening and the interfaces in use. This form only prepares your message; nothing is submitted or stored.